Tick I acknowledge that I will be required to agree to the End User License Agreement and Terms of Use before I can play League of Legends. 個 box 之後按 CONTINUE TO STEP 3
係 step 3 按 create account
係 step 4 按 download
[size=12px][size=14px]安裝問題
When the setup files finish downloading, the installation process will begin automatically. If possible, install League of Legends to the root C:\ drive. Do not install League of Legends to Program Files, or any Windows user account specific folders, like My Documents. If you need to restart the installation process at any time, you can do so by running setup.exe in the LoL Installer folder.
Last Updated
5th of March, 2010
How would you rate this answer?
Helpful
Not helpful
Help us improve. Why was this unhelpful?
Thank you for rating this answer.
The League of Legends launcher uses server aliases that have problems connecting to some ISP default DNS servers. If your launcher never seems to start downloading a patch, you may want to change to public DNS servers in your network settings. Most often, this only applies to players outside of the US.
WARNING: Changing these settings can cause problems with your internet connection if you have specified network configurations for another purpose. Be prepared to revert to your old settings; save any information you are about to change.
Windows 7 and Vista
1. Open the Start Menu
2. Open Control Panel
3. Select Network and Internet
4. Select Network and Sharing center
5. Select Change Adapter Settings on the navigation bar on the left
6. Right click on your network adapter and select properties
7. Select Internet Protocal Version 4 (TCP/IPv4) and open Properties
8. Go to the bottom of the menu and change "Obtain DNS server address automatically," to "Use the following DNS server addresses:"
9. Put in the following public DNS servers, one in each empty field:
4.2.2.2
4.2.2.3
10. Save your changes by selecting Ok
Windows XP:
1. Open the Start Menu
2. Open Control Panel
3. Open Network Connections
4. Right click on your network adapter and select properties
5. Select Internet Protocal (TCP/IP) and open Properties
6. Go to the bottom of the menu and change "Obtain DNS server address automatically," to "User the following DNS server addresses:"
7. Put in the following public DNS servers, one in each empty field:
4.2.2.2
4.2.2.3
8. Save your changes by selecting Ok作者: mrkit 時間: 2010-4-22 12:03 AM 如果安裝唔都
唔洗再down過
開始->搜尋->範圍=我的電腦 搵setup
見到個修改時間係down果陣就係